Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Application field and operation requirements of Color Steel Roof Roll Forming Machine
Aug 09, 2018

The center line of the upper and lower rolls of the Color Steel Roof Roll Forming Machine should be on the same plane line during the operation. The center wheel shall be used for the operation. The flatness of the upper and lower rolls shall not be more than 1mm during operation. The gaps are equal and the gap deviation is +0.1 mm. Debug with conventional gauges or feeler gauges. The pressed plate formed by the rolling process of the machine is both elegant and elegant, and has a flat appearance, uniform ripple, high utilization rate, high strength, high production automation, low cost and durability.

Color Steel Roof Roll Forming Machine is widely used in large and medium-sized enterprise civil buildings, such as factory buildings, garages, hangars, stadiums and exhibition halls, theaters, etc. Forming consists of discharging, forming and post-forming cutting. The products are flat and beautiful in appearance, uniform in paint, high in strength and durable. They are widely used in industrial and civil buildings, such as factories, warehouses, garages, hangars, stadiums, etc. Exhibition halls, theaters and other rooms and walls.

When the Color Steel Roof Roll Forming Machine is in operation, the whole machine is mainly composed of computer control system, hydraulic pumping station system and automatic post-shearing system. The color steel plate equipment adopts high-level automatic control software to realize production informationization. management. Color steel forming equipment can be divided into many models according to the color steel plates produced. However, depending on the use of the formed color steel plate, it can be roughly divided into wall panel materials and roof panels.

http://www.longborollformer.com/


Previous: Installation requirements and processing technology of Hydraulic Cutter Perforated Shutter Door Roll Forming Machine

Next: Maintenance and drive requirements for round tube forming machine