Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Glazed Tile Roll Forming Machine safety operation procedures and usage methods
May 08, 2018

Glazed Tile Roll Forming Machine are controlled in accordance with certain standards and performance in actual use. Control is performed using certain standards and forms, which can produce good performance and contribution, and can have good usage trends and maintenance methods in use.

 

First, the operating procedures

1. Wear tight protective clothing before operation. Fasten the cuffs. The hem of the jacket must not be left open. Do not wear or remove clothes on the next machine or cloth it to prevent injury. The safety helmet must be worn, the mattress should be placed in the cap, and no skirt and slippers are allowed. The various parts of the color steel tile press should always be kept lubricated. Each shift should be lubricated once by the operator. Every six months, the mechanic must add the rolling bearing part. Lubricate once.

 

2. Glazed Tile Roll Forming Machine is applicable to all kinds of steel plate, copper plate, aluminum plate and non-metallic material plate whose shearing material thickness is machine tool rating, and it must be material without hard mark, welding slag, and weld seam. No super thickness is allowed.

 

3, Glazed Tile Roll Forming Machine use method:

A. Adjust the blade clearance according to the thickness of the material being cut.

B. Adjust the fixture or fixture according to the width of the material being cut.

C. Before the operation of the color steel tile press, 1-3 empty strokes are performed before normal operation.

 

Second, the maintenance method

1, strictly in accordance with operating procedures.

2. Each time before starting the machine, press the lubrication chart to request timing, fixed-point, and fixed-quantity lubrication. The oil should be clean and free of sediment. Non-designated personnel are strictly prohibited from operating the equipment. Normally, it must be stopped.

3. Lubricating oil in the motor bearing should be changed and filled regularly, and often check whether the work of the electrical part is normal, safe and reliable.

4, regular inspection of the triangle belt, handles, knobs, buttons are damaged, serious wear should be promptly replaced, and reported spare parts added.

http://www.longborollformer.com/

Previous: Steel roll forming machine maintenance method and safety operation specification

Next: Rolling shutter door forming machine raw materials and composition