Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Operation method and operation advantage of corrugated glazed tile forming machine
Jul 30, 2018

The corrugated glazed tile forming machine has a very reasonable design in the process of designing. The suction box, forming and sealing are automatically processed in one go. The mechanical performance of the corrugated glazed brick forming machine is precise and durable, no vibration during operation, stable operation and long service life. The corrugated glazed brick forming machine adopts PLC+ human-machine interface display control, which has high performance, high speed and high efficiency. It can be used for stand-alone operation during operation, and can also be used with automatic packaging assembly line.

Operation method of corrugated glazed tile forming machine

1. Select the flat surface and stabilize the machine. The chassis feet can be pulled apart to make the machine panel easy to observe.

2. Insert the plug on the hand-held sensor head into the socket on the panel and tighten. Pay attention to positioning gap

3. Plug one end of the power cord into the socket on the rear panel of the chassis and the other end into the power supply socket. Be sure to use a single-phase three-wire power supply.

4. The corrugated glazed tile forming machine will effectively place its induction head on the container cover to a certain extent.

Press the start button on the handle, then the “HEATING” red indicator light is on, indicating that it is heating, the sensor head should not be removed, the “HEATING” red indicator light is off and then the sensor head is removed, etc. “Prepare (WARM UP) "The green indicator light is on or the buzzer in the machine is short "beep" prompt and the next container can be sealed.

http://www.longborollformer.com/


Previous: Automatic hydraulic cutting double-layer forming machine increases service life and chrome treatment

Next: Composition requirements and structural stability of door frame roll forming machine