Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Safety operation and maintenance cycle of tile roll forming machine
Jun 01, 2018

During the operation of the tile roll forming machine, the worker should send the prepared powder to the press process, and apply a certain pressure to the powder after passing through the mold cloth, so that the powder is pressed into the brick. It should be noted that in the process of pressing bricks into a brick using a tile roll forming machine, the quality requirements of the powder must be ensured, and at the same time the correct operation must be ensured so as not to affect the quality of the bricks.

 

Then, in actual practice, what issues should be paid special attention? First of all, when using a tile roll forming machine, we need to place the workpiece correctly. Remember that before pressing the workpiece, you must select the correct placement position according to the actual size and height of the workpiece. It is forbidden to press the workpiece unevenly around the right and the left and right sides.

 

In practice, a detailed and thorough inspection should be performed prior to turning on the tile roll forming machine to ensure safe operation. The first thing to do is to check if the safety guards are correct, solid and reliable. Second, check whether the various transmission components and connection components of the equipment are fastened. At the same time, we must also pay attention to checking whether the pressure of the hydraulic system is normal, whether the steering of the oil pump is correct, and whether the lifting movement is flexible and reliable.

 

In the absence of anomalies, the tile roll former is then allowed to run for a while, paying attention to the operation of the equipment during this process. Formal production is only possible if it is confirmed to be good. During use, we need to reasonably determine the maintenance cycle for the aircraft based on the specific usage. It is usually required to conduct a large-scale inspection every month, focusing on checking the use of components and other travel limit switches in the machine box.

 

At the same time, special attention should be paid to checking the lubrication conditions of the transmission parts of the tile roll forming machine, as well as the security of the assembly of various security protection, and to adjust or replace. In addition, we must also pay attention to the use of ceramic cylinder roller molding machine cylinders, oil, and hydraulic systems. We must check whether the fluids need to be replaced, whether there are any leaks in the oil circuit interfaces, and whether the system pressure is normal.

http://www.longborollformer.com/


Previous: Highway guardrail roll forming machine structure and application advantages

Next: The use, characteristics and process flow of Roof Double Layer Roll Forming Machine