Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
Selection of Cold Roll Forming Machine Factors to Consider
May 16, 2018

There are many reasons for the choosing of Cold Roll Forming Machine. The most important ones need to be considered:

First, reduce production costs The use of cold-formed molding production lines for production, the cost will generally be less than other production methods, cold-formed molding production and punching, red notch, embossed pattern, welding, adhesive, painting, packaging and other The combination of methods can further reduce production costs while avoiding the handling and inventory of each process, as well as greatly reducing costs.

Second, increase the sales volume of molded products, increase production capacity, and expand production scale. When an existing product is formed by bending, stamping, welding, squeezing or purchasing reaches a certain degree, Therefore, improving the production of cold forming equipment is the most economical shortcut, which not only reduces the input costs of labor and raw materials, but also avoids the investment of additional equipment.

Third, the introduction of new types of cold bending equipment, such as the use of double-layer integrated equipment, 840/900 and other color steel equipment, can greatly improve the production efficiency, yield rate is better, the income cycle is faster, so that your Costs are rewarded and profitable in the shortest possible time.  At the same time, the introduction of new equipment can also achieve some special production requirements, such as high tension or special material products, or the production of different length, width products.

Cold-formed steel is one of many kinds of steel products. A certain width of strip steel is gradually deformed under a normal temperature condition through a set of longitudinally arranged rolls to meet the required shape and size, and then cut to a corresponding size by the determined size. length. This product is a cold-formed steel.Of course, cold-formed steels can also be obtained by deformation methods such as stamping, bending or drawing. However, the roller bending method is suitable for large-scale industrial production. Its product quality, processing cost, and production efficiency are unmatched by other methods. It is currently the main production technology of cold-formed steel. If the equipment is equipped with welding equipment (such as high-frequency welding, argon arc welding, etc.) can also produce closed-section cold-formed steel.

The main difference between cold-formed steel and welded steel pipe is:

Welded steel pipes are mainly used for conveying fluids such as gas and tap water. Petroleum, liquefied gas, steam, etc. The steel pipe is required to withstand a certain pressure, and the cold-formed steel is used to make the structure. Under the external force, it has certain requirements on the section, shape, size and mechanical properties of the steel.

http://www.longborollformer.com/


Previous: Color Steel Glazed Tile Roll Forming Machine Safety Operation Regulations

Next: How to choose your color steel tile press