Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > News > Content
Roof Panel Roll Forming Machine Maintenance And Use Advantages
Mar 27, 2018

The roof panel roll forming machine needs to pay attention to the maintenance in the process of operation. The circuit needs to pay attention to the cleaning of the circuit board. During the operation process, it is necessary to periodically clean the dust of the weak case, so that the electric box can be effectively kept dry. This will prevent moisture.

The roof panel roll forming machine needs to effectively check whether there are any oil leaks in various parts of the oil path during operation, and if it is found that it needs to be processed in time, the piston rod scratches and oil deterioration can be prevented during the operation.

Whether the drive position of the roof panel roll forming machine is inspected for wear or not, check whether there is any blockage phenomenon in each grease nipple, and note the butter. It is recommended to replace the hydraulic oil in the roof panel roll forming machine once a year and clean the tank sludge.

The water cooler of the roof panel roll forming machine is cleaned in time to prevent the oil temperature from rising to accelerate the aging of the oil quality. Of course, the safety is no small matter. The circuit safety door switch, the oil pressure relief valve, the mechanical safety stop, and the machine warning light must be maintained during maintenance. Check for proper operation.

The water cooler of the roof plate forming machine is cleaned in time to prevent the oil temperature from rising and causing accelerated aging of the oil. Of course, no matter what the safety, circuit safety door switch, oil pressure relief valve, mechanical safety stop, Machine warning lights must be checked for proper operation during maintenance.

http://www.longborollformer.com/