Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > Knowledge > Content
The use of CNC control panel in color steel roll forming machine
May 12, 2018

Color steel roll forming machine adopts high-level automatic control software to realize the production information management. The whole unit automatic control system adopts a highly integrated network, which makes the performance of the automation system more superior. At the same time, color steel roll forming machine also has operations, maintenance, maintenance and machinery. The debugging, mold replacement and other advantages.


The use of CNC control panel in color steel roll forming machine


1. Forward and backward is controlled by the frequency converter to control the positive and negative running of the host. Its speed can be controlled by the high speed/low speed switch on the panel. In the automatic operation, the speed switch must be placed in the high speed position.


2. The undercut and return buttons are used to control the operation of the cutter. If press and return buttons are all invalid, it is generally considered whether the hydraulic fluid level of the hydraulic oil tank is too low. The hydraulic fluid should be added to the no tank. In addition, the lower cutter cuts and returns the cutter. The front limit switch operation will automatically stop. The


3、The oil pump switch is used to control the starting and stopping of the oil pump. Before running, please open the oil pump to provide pressure for the hydraulic system. After the oil pump is running, pay attention to whether the oil pump running direction should be consistent with the direction of the arrow. If not, please put the oil pump motor. Any two of the three phases in the electricity will change each other.

Previous: How to choose your color steel tile press

Next: Steel roll forming machine maintenance method and safety operation specification