Contact Us
TEL: +86-510-88718069
Fax: +86-510-88718069
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China
Home > News > Content
Tile Roll Forming Machine Operation Methods And Precautions
Mar 23, 2018

The Tile Roll Forming Machine needs to select the leveling table in the process of operation to stabilize the machine. During the operation, the foot of the frame can be pulled apart to make the machine panel easy to observe. The tile roller forming machine needs to insert the plug on the hand-held sensor head into the panel. Socket and tighten.

The Tile Roll Forming Machine effectively inserts one end of the plug of the power cord into the socket on the rear panel of the chassis, and the other end into the power supply socket. Be sure to use the single-phase three-wire power supply. Open the power switch on the rear panel of the chassis and press the power key on the panel. When the green indicator is ready, the machine can work.

Tile Roll Forming Machine will effectively place its sensor head on the lid of the container and effectively press the start button on the handle. At this time, the red heating indicator light is on, indicating that it is heating, the sensor head will not be removed, and the red indicator light will be off and then removed. Sensor head, ready to wait for the green indicator light or the buzzer inside the machine can be heard after the next container sealing operation.

The tile roll forming machine needs to effectively inspect the sealing quality. According to different materials, diameters of containers and production efficiency, the SETTING BUTTON button is properly trimmed to make the sealing quality the best.