Fax: +86-510-88718069
E-mail: harrylong@lbrollformer.com
Address: No.1 Wankun Road, Xinba Industrial Zone, Xishan District, Wuxi City, Jiangsu, China





Perforation Shutter Door Roll Forming Machine Introduction Perforation Shutter Door Roll Forming Machine has characters of high speed, high production, good performance, low labor and save cost. It is the best selections for producing the metal sheet cold roll form products. In Component Of The...
Perforation Shutter Door Roll Forming Machine Introduction
Perforation Shutter Door Roll Forming Machine has characters of high speed, high production, good performance, low labor and save cost. It is the best selections for producing the metal sheet cold roll form products.
The Shutter Door Roll Forming Machine is contriled by gear oil pump. After the hydraulic oil is injected into the hydraulic tank, the pump drives the cutter to start the cutting operation.
The system includes a hydraulic tank, a hydraulic pump, two hydraulic lines and two solenoid valves.
Shutter roll forming machines are controlled by industrial computers.
The length of the target is adjustable, and its number can be adjusted. There are two modes of computer mode: automatic and manual modes. The system is easy to operate and use.
Perforation Shutter Door Roll Forming Machine Details
Input Material: | Galvanized Steel And Stainless Steel | Material Of Rollers: | SKD11 Or CR15 |
Guarantee: | 5 Years | Color: | To Be Customized |
Hardness Of Rollers: | HRC58~62 Degree | Forming Stations: | 13 Stations |
Automatic: | Automatic Perforation |
Un-coiler
1. Capacity: 2 tons
2. Material: #45 steel quenched
3. Inner diameter: 410~ 580mm
Main roll former
1. Stations: 13
2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON, 800 MPA
3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA
4. Bearing brand: FAG Germany
5. Main Motor: 5.5 KW, 380V, 50HZ
PLC Control Cabinet:
1. Touch screen brand: DELTA
2. PLC brand: DELTA
3. Inverter brand: DELTA
4. Main components for low pressure electricity: Schneider Germany
5. Encoder: Omron
Output table
1. Length: 6 meters
2. Drive type: Rollers
Cutting platform
1. Cutting type: Hydraulic system
2. Motor: 4KW; 380V; 50HZ
3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950
Our Advantage
we are the experienced factory
we have many kinds of windows and doors series roll forming machines
We can print your logo in machines
We can customize the color according to your needs
We can do OEM &ODM
Reliable supplier for Shutter Door Roll Forming Machine
Longbo Roll Forming Machinery is your best choice! We always believe: Quality is everything!